2014 Mercedes-Benz Sprinter
Wiper Blade Size
The 2014 Mercedes-Benz Sprinter uses 26"" and 24"" front wiper blades, with no rear wiper on this model. The blades mount on pin-lock arms. This is a full-size configuration typical of full-size sedans and trucks from this era.
The 2007–2018 Mercedes-Benz Sprinter all use the same wiper blade sizes, so any blade that fits the 2014 model will also fit these years.
Quick Purchase Options
Premium Compatibility Guide
Pin Installation Guide
Pin-type arms secure the blade with a small metal or plastic pin that locks into a hole in the arm. Found on select European and Asian models, they require pressing the pin inward to release. A small flat-head screwdriver helps with removal.
- 1 Lift the wiper arm away from the windshield.
- 2 Locate the small locking pin on the underside of the blade adapter.
- 3 Use a flat-head screwdriver or your fingernail to press the pin inward and release the blade.
- 4 Slide the old blade off the arm post.
- 5 Align the new 26"" driver-side blade over the arm post and push down until the pin clicks into the locked position.
- 6 Lower the arm and verify the blade sits flat against the glass.
- 7 Repeat on the passenger side with the 24"" blade.
- 8 Spray washer fluid and cycle the wipers to verify smooth, streak-free operation.
Tips
• Pin-type arms use a small metal or plastic pin to lock the blade. A thin flat-head screwdriver makes removal easier.
• Do not bend or force the pin — it should release with light pressure.
• Some aftermarket blades include a multi-adapter kit; select the pin adapter specifically.
Rear Wiper
The 2014 Mercedes-Benz Sprinter does not have a rear wiper blade. This is common for sedans and coupes. If your vehicle was originally equipped with a rear wiper and it has been removed, see our rear wiper delete guide for cap and plug options.
Learn about rear wiper delete options →Helpful Resources
- Connector Type Photo Key — identify your arm connector
- Why Wipers Don't Fit — 9 common causes and fixes
- How We Source Our Data — accuracy and corrections