2014 Nissan Altima
Wiper Blade Size
The 2014 Nissan Altima uses 26"" and 17"" front wiper blades, with no rear wiper on this model. The blades mount on J-Hook (curved hook) arms. This is a full-size configuration typical of full-size sedans and trucks from this era.
The 2002–2018 Nissan Altima all use the same wiper blade sizes, so any blade that fits the 2014 model will also fit these years.
Quick Purchase Options
Premium Compatibility Guide
J-Hook Installation Guide
J-Hook is the most common wiper arm type, found on the majority of vehicles worldwide. The arm ends in a curved metal hook that the blade adapter clips onto. Nearly all universal replacement blades include a J-Hook adapter, making replacement straightforward.
- 1 Pull the wiper arm away from the windshield until it locks in the upright position.
- 2 Rotate the blade perpendicular to the arm to expose the J-Hook slot.
- 3 Press the small release tab on the blade adapter and slide the old blade downward off the hook.
- 4 Align the new 26"" driver-side blade with the J-Hook opening and slide it upward until it clicks into place.
- 5 Gently lower the arm back onto the windshield to confirm a snug fit.
- 6 Repeat on the passenger side with the 17"" blade.
- 7 Spray washer fluid and cycle the wipers to verify smooth, streak-free operation.
Tips
• J-Hook is the most common arm type — most universal wiper blades include a J-Hook adapter in the box.
• Place a folded towel on the windshield before removing the blade. If the bare arm snaps back, it can crack the glass.
• If the new blade wobbles, double-check that the hook is fully seated in the adapter channel.
Rear Wiper
The 2014 Nissan Altima does not have a rear wiper blade. This is common for sedans and coupes. If your vehicle was originally equipped with a rear wiper and it has been removed, see our rear wiper delete guide for cap and plug options.
Learn about rear wiper delete options →Helpful Resources
- Connector Type Photo Key — identify your arm connector
- Why Wipers Don't Fit — 9 common causes and fixes
- How We Source Our Data — accuracy and corrections